Textile procurement glossary
Plain-English definitions of 42 terms used in yarn and fabric trading, quality testing, auctions and compliance in India.
Yarn & Fibre
- Ne (English cotton count)
- Ne is the number of 840-yard hanks of yarn that weigh one pound. It is an indirect count, so a higher Ne means a finer yarn: 40s Ne is finer than 20s Ne. Ne = 590.5 ÷ tex.
- Nm (metric count)
- Nm is the number of kilometres of yarn per kilogram. Like Ne it is an indirect count; Nm ≈ 1.693 × Ne.
- Tex
- Tex is the weight in grams of 1,000 metres of yarn or fibre. It is a direct count, so a higher tex means a coarser yarn. Decitex (dtex) is grams per 10,000 metres.
- Denier
- Denier is the weight in grams of 9,000 metres of filament or yarn, used mainly for polyester, nylon and viscose filament. Denier = 9 × tex, and denier ≈ 5,315 ÷ Ne.
- CSP (Count Strength Product)
- CSP is the lea strength of a yarn in pounds multiplied by its Ne count. It is a quick single-number measure of yarn strength used when comparing lots of the same count.
- Uster Statistics
- Uster Statistics are global benchmark tables published by Uster Technologies that rank yarn quality parameters such as evenness, imperfections and hairiness by percentile. "5% Uster" means the yarn is better than 95% of comparable yarns worldwide.
- IPI (Imperfection Index)
- IPI is the total of thin places, thick places and neps per kilometre of yarn, measured on an evenness tester. Lower IPI means cleaner yarn and fewer fabric faults.
- CVm% (mass variation)
- CVm% is the coefficient of variation of yarn mass along its length. A lower value means more even yarn, which reduces streaks and barré in fabric.
- Combed vs carded yarn
- Carded yarn is spun after carding only; combed yarn goes through an extra combing step that removes short fibres and neps. Combed yarn is smoother, stronger and costlier, and is preferred for fine knits and shirting.
- Compact yarn
- Compact yarn is ring-spun yarn made with a condensing zone that tucks in surface fibres, giving lower hairiness and higher strength than conventional ring yarn.
- Open-end (rotor) yarn
- Open-end or rotor yarn is spun in a high-speed rotor instead of on a ring spindle. It is cheaper and more uniform but weaker and bulkier, and is common in coarse counts for denim, towels and home textiles.
- Baby cone
- A baby cone is a small sample cone of yarn from a production lot, sent to a buyer to run a trial on their own loom or knitting machine before confirming a bulk order.
- Lot and shade lot
- A lot is yarn produced from one fibre mix under the same settings. Mixing lots in one fabric can cause visible shade differences, so buyers ask for single-lot supply and lot numbers on every carton.
Fabric
- Greige (grey) fabric
- Greige or grey fabric is woven or knitted fabric straight off the machine, before scouring, bleaching, dyeing or finishing.
- GSM
- GSM is fabric weight in grams per square metre. Light T-shirt jersey is often around 140–160 GSM, while fleece and heavy twill run much higher.
- EPI and PPI
- EPI (ends per inch) counts warp threads and PPI (picks per inch) counts weft threads in woven fabric. Together with the yarn counts they define a fabric construction, written for example as 40×40 / 132×72.
Cotton Trade
- Candy
- A candy is the traditional Indian trading unit for lint cotton, equal to 356 kg. Cotton prices in India are commonly quoted in rupees per candy.
- Cotton bale (India)
- In India a standard cotton bale is 170 kg of lint. Crop size and trade statistics are reported in lakh bales of 170 kg.
- Kapas
- Kapas is raw seed cotton as picked from the field, before ginning separates the lint from the seed. Farmers sell kapas; mills buy ginned lint.
- Ginning
- Ginning is the process of separating cotton fibre (lint) from the seed. The share of lint obtained from kapas is called the ginning outturn.
- Basis
- Basis is the difference between the local cash price of cotton and a reference futures price. Mills that hedge with futures still carry basis risk: the risk that this gap changes.
- Yarn spread (crush margin)
- The yarn spread is the yarn selling price per kg minus the cost of the cotton needed to make that kg of yarn, after allowing for waste. It is the gross margin a spinning mill earns before conversion costs.
Bidding & Procurement
- RFQ (Request for Quotation)
- An RFQ is a formal request asking selected suppliers to quote a price and terms for a defined specification and quantity. On AA Exchange an approved buyer requirement becomes an RFQ that AA Enterprises sends to verified suppliers.
- Reverse auction
- A reverse auction is a live auction where suppliers compete by lowering their price, and the lowest qualifying bid wins. It suits standard items like a given yarn count where price is the main difference.
- Forward auction
- A forward auction is a live auction where buyers compete by raising their price for goods a seller offers, such as surplus stock or a lot of fabric; the highest bid wins.
- Sealed-bid tender
- In a sealed-bid tender every bidder submits one price that stays hidden until a fixed opening time. Nobody can react to rivals, which suits large or one-off purchases and reduces collusion.
- Soft close (anti-sniping)
- Soft close extends an auction by a few minutes whenever a bid arrives near the end. It stops last-second "sniping" so every bidder gets a fair chance to respond.
- Proxy bid
- A proxy bid is a limit a bidder sets in advance; the system then bids for them one step at a time, only as far as needed, without revealing the limit.
- Reserve price
- A reserve price is the hidden limit an auction must reach for an award to be made: the highest acceptable price in a reverse auction, or the lowest acceptable price in a forward auction.
- L1 (lowest bidder)
- L1 is Indian procurement shorthand for the lowest qualifying bidder, followed by L2, L3 and so on. Awards often go to L1 after technical checks.
- EMD (Earnest Money Deposit)
- EMD is a refundable deposit a bidder pays to take part in a tender or auction. It is returned to losing bidders and can be forfeited if the winner backs out.
Compliance & Documents
- GSTIN
- GSTIN is the 15-character Goods and Services Tax identification number every GST-registered business in India holds. AA Exchange checks it before approving an enterprise.
- HSN code
- HSN codes classify goods for GST and customs. Cotton yarn and fabric fall under chapter 52, man-made filament and staple fibres under chapters 54 and 55, and knitted fabric under chapter 60.
- E-way bill
- An e-way bill is an electronic document generated on India's GST portal for moving goods above the notified value threshold. Transporters must carry it with the consignment.
- GRN (Goods Receipt Note)
- A GRN is the buyer's record that goods have arrived, listing quantity received and any shortage or damage. It is usually the trigger for invoice approval and payment.
- Digital Product Passport (DPP)
- The EU Digital Product Passport is a digital record of a product's materials, origin and environmental data, introduced under the EU Ecodesign for Sustainable Products Regulation (ESPR). Textiles are a priority product group, so exporters to Europe will need traceable supply-chain data.
- OEKO-TEX STANDARD 100
- OEKO-TEX STANDARD 100 is a label showing that every part of a textile product has been tested for harmful substances against published limits.
- GOTS
- GOTS (Global Organic Textile Standard) certifies textiles made with organic fibre and checks environmental and social criteria across processing, from spinning to finished goods.
- Kasturi Cotton Bharat
- Kasturi Cotton Bharat is India's branded cotton programme, backed by the Ministry of Textiles and the Cotton Corporation of India, which promotes traceable, quality-tested Indian cotton.
- NABL-accredited lab
- An NABL-accredited lab is a testing laboratory accredited by India's National Accreditation Board for Testing and Calibration Laboratories. Yarn and fabric test reports from such labs are widely accepted by buyers.
Finance
- Bill discounting
- Bill discounting lets a seller receive cash for an unpaid invoice before its due date, from a bank or financier, in exchange for a discount on the invoice value.
- TReDS
- TReDS (Trade Receivables Discounting System) is an RBI-regulated set of online platforms where MSMEs sell invoices raised on large buyers to financiers through competitive bidding.